Bypass Copying (Thick Paper/Ohp Film) - Lanier 5722 Operator's Manual

10. BYPASS COPYING (THICK PAPER/OHP FILM)

Bypass copying is convenient when the size of any paper cassettes installed in the copier is
not the size you require or when you want to use special sizes of paper such as Full Bleed
(12"X18") or special types of paper such as thick paper and OHP films(transparency) or sticker
labels.
Bypass Copy Mode
● This copier has bypass copy modes corresponding to paper types.
Refer to the table below and select the mode corresponding to the sheets. Otherwise, it
may cause paper jams or lower the image quality.
● The number of sheets that can be set at a time differs depending on paper type.
Setting more than specified number of sheets at a time may cause copier failure or paper
jams. Be sure to set within the specified range.
● The range of acceptable paper sizes is from Full Bleed to Statement-R.
Bypass Copy Mode
PLAIN
12"X18"
OHP FILM
THICK 1
THICK 2
THICK 3
*Full Bleed = 12"X18"
Corresponding Paper Type
Plain paper (17-22 lb.)
Plain paper (23-24 lb.)
*Full Bleed (17-28 lb.)
OHP films
Thick paper (25-28 lb.)
Thick paper (29-37 lb.)
Thick paper (38-110 lb. index)
Thick sticker labels
Maximum Capacity
approx.50 sheets
approx.40 sheets
approx.30 sheets
approx.20 sheets
approx.30 sheets
1 sheet
1 sheet
41