Table of Contents
Advertisement
● The sensor unit immediately detects the size
of the original, selects the paper size matched
to the original, and calculates the reproduction
ratio based on the detected original size and
the selected copy size. The reproduction ratio
is then displayed.
● If the following message appears:
Change direction of original
change the direction of the original on the
glass.
● If the following message appears:
Use reduction cassette
install the correct-sized cassette, and start the
procedure all over again.
5
Select the desired image density level and
copy quantity.
6
Press the START key.
● Reduced or enlarged copies of the selected
size will exit.
Tips:
The copier may not be able to detect the following
types of original in the AMS mode:
● Transparent originals such as OHP film
● Entirely blackish originals or originals with
blackish edges
Refer to "Selecting the Original Size and the
Copy Size" on page 34 to make copies of such
originals.
,
,
33
Advertisement
Table of Contents
