Table of Contents
Advertisement
3
Place the original(s) on the original feed
tray or on the glass.
● See page 22 for how to set the originals.
4
Select the desired copy size, image density
level, reproduction ratio, copy quantity,
etc. if necessary
5
Press the START key.
Tip:
Edges can be erased also in the bypass
copy mode. To do this, set the paper in
the sheet bypass (see page 42), and press
the desired COPY-SIZE key to select the
desired paper size. If Letter-R paper is
used, press the corresponding COPY-SIZE
key twice.
65
Advertisement
Table of Contents
