Table of Contents
Advertisement
3
Install a new staple cartridge.
● First remove the cap from the new staple
cartridge.
● Slide the new staple cartridge fully into the
stapler.
4
Close the stapler cover.
5
After replacing the staple cartridge, make
sure that the stapler operates correctly by
stapling a few sheets of paper as operation
test, referring to "Manual Stapling" on page
127.
● If the stapler does not operate correctly, carry
out test stapling 7 times until it operates
correctly.
If the stapler still does not operate correctly,
reset the staple cartridge.
Note: Do not remove the staple cartridge except
when you replace it with a new one.
151
Advertisement
Table of Contents
