Connecting The Ac Power Cord For The Fixed Ac Power Module - H3C S5560S-SI Installation Manual

Switch model
S5560S-28F-SI
S5560S-28DP-SI
S5130S-28F-SI
Other switch models
Connecting the AC power cord for the fixed AC power
module
1. Connect the female connector of the AC power cord to the AC-input power receptacle on the
switch. See
2. Use a cable tie to secure the power cord to the handle near the AC-input power receptacle. See
Figure
3. Connect the other end of the power cord to an AC power source.
Figure 24 Connecting the AC power cord for the fixed AC power module (1)
Figure 25 Connecting the AC power cord for the fixed AC power module (2)
Available power source
RPS (RPS1600-A)
•
•
AC power source
Figure 24.
25.
AC power source
240 VDC high-voltage
power source
20
Connection procedure reference
Connecting the DC power cord for the
fixed DC power module
Connecting the power cord for a
PSR75-12A power module
Connecting the AC power cord for the
fixed AC power module