Connecting The Power Cord For An Ac Power Module - H3C S5130-EI Series Installation Manual

Switch model
•
S5130-28S-HPWR-EI
•
S5130-28TP-PWR-EI
•
S5130-52S-PWR-EI
•
S5130-52TP-PWR-EI

Connecting the power cord for an AC power module

The power cord connection procedure is similar for a built-in AC power module and a
PSR150-A1/PSR150-A power module. The following procedure connects the power cord for a
PSR150-A1 power module.
To connect the power cord for an AC power module:
Pull the bail latch leftward, as shown in
1.
Connect the female connector of the AC power cord to the power-input power receptacle on the
2.
power module. See callout 1 in
Pull the bail latch rightward to secure the connector to the power receptacle. See callout 2
3.
in Figure
Connect the other end of the power cord to an external power source.
4.
For a PSR150-A1 power module, connect the power cord to an AC power source or a 240V
high-voltage DC power source.
For a built-in power module or a PSR150-A power module, connect the power cord to an AC
power source.
Figure 18 Connecting the power cord for an AC power module (1)
Available power source
AC power source
RPS (RPS1600-A)
19.
Figure 18.
Figure 19.
13
Connection procedure reference
Connecting the power cord for an AC
power module
Connecting a DC power cord for the
built-in DC power module (other switch
models than S5130-28PS-EI)