Connecting The Power Cord; Connecting The Ac Power Cord For The Fixed Ac Power Module - H3C S5130-HI Series Installation Manual

Connecting the power cord

CAUTION:
• The PSR150-A1 power modules each are provided with an AC power cord that uses a C13
connector. The PSR360-56A/PSR720-56A/PSR1110-56A power module is provided with an AC
power cord that uses a high-temperature C15 connector. Do not confuse the power cords.
• Provide a circuit breaker for each power module and make sure the circuit breaker is off before
installation.
Table 5 Power cord connection procedures at a glance
Power module
Fixed power module
PSR150-A1
PSR150-D1
PSR360-56A
PSR720-56A
PSR1110-56A
Connecting the AC power cord for the fixed AC power
module
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
1.
Attach the hooks of the bail latch into the holes on the two sides of the AC-input power
2.
receptacle, and pull the bail latch upwards (see
Connect the female connector of the AC power cord to the AC-input power receptacle on the
3.
switch (see callout 1 in
Pull the bail latch down to secure the connector to the power receptacle (see callout 2 in
4.
39).
Connect the other end of the power cord to an AC power source.
5.
Available power source
AC input
–48 VDC input
External RPS power module
RPS800-A or RPS1600-A
AC input
–48 VDC input
External RPS power module
RPS800-A or RPS1600-A
AC input
Figure 39).
27
Connection procedure reference
Connecting the AC power cord for the fixed AC
power module
Connecting a DC power cord for the fixed DC
power module
Connecting the AC power cord for a PSR150-A1
power module
Connecting the DC power cord for a PSR150-D1
power module
Connecting the AC power cord for a
PSR360-56A, PSR720-56A, or PSR1110-56A
power module
Figure 38).
Figure