Installing the switch
CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any consequence.
Figure 1 Hardware installation flow
Install power modules
Installing the switch in a 19-inch rack
Mounting brackets
Table 4
describes the mounting brackets applicable to the switch.
Table 4 Mounting brackets applicable to the switch
Switch model
S5560S-28P-SI
S5560S-52P-SI
Start
Install the switch
Connect the grounding cable
Yes
Use removable
power modules?
No
Connect power cords
Verify the installation
Turn on the circuit breakers
Operating correctly?
Yes
End
Applicable mounting
brackets
Mounting brackets A (provided)
Troubleshoot the switch
No
Turn off the circuit
breakers
6
Views
See A in
Figure
2.