10/100Base-T Autosensing Ethernet Port; 10/100/1000Base-T Autosensing Ethernet Port; Sfp Port - H3C S5560S-SI Installation Manual

IMPORTANT:
USB devices from different vendors vary in compatibilities and drivers. H3C does not guarantee
correct operation of USB devices from all vendors on the S5560S-28DP-SI switch. If a USB device
fails to operate on the switch, replace it with one from another vendor.

10/100BASE-T autosensing Ethernet port

The S3100V3-SI switch series provides 10/100 BASE-T autosensing Ethernet ports.
Table 26 10/100BASE-T autosensing Ethernet port specifications
Item
Connector type
Port attribute
Max transmission distance
Transmission medium
Compatible standards

10/100/1000BASE-T autosensing Ethernet port

Table 27 10/100/1000BASE-T autosensing Ethernet port specifications
Item
Connector type
Port attribute
Max transmission distance
Transmission medium
Compatible standards

SFP port

The S5560S-28P-SI switch, S5560S-52P-SI switch, S5560S-28F-SI switch, S5560S-28DP-SI,
S5130S-28F-SI switch, S5130S-28S-HPWR-LI, S5120V2-SI switch series, S5120V2-LI switch
series, S5110V2-SI switch series, S5000V3-EI switch series, S5500V3-SI switch series, and
S3100V3-SI switch series provide SFP ports. The SFP ports on these switches support GE SFP
transceiver modules and cables described in
Only the following SFP ports and switches support FE SFP transceiver modules described in
29.
•
All SFP ports on the S5560S-28F-SI, S5130S-28F-SI, S5130S-28S-HPWR-LI,
S5120V2-28P-HPWR-LI, and S3100V3-28TP-PWR-SI switches.
•
SFP ports 17 to 24 on an S5560S-28DP-SI switch.
•
SFP ports 9 and 10 on an S5120V2-12TP-HPWR-LI switch.
Specification
RJ-45
10/100 Mbps, half/full duplex, MDI/MDI-X autosensing
100 m (328.08 ft)
Category-5 and above twisted pair cable
IEEE 802.3i, 802.3u, 802.3ab
Specification
RJ-45
•
10 Mbps, half/full duplex
•
100 Mbps, half/full duplex
•
1000 Mbps, full duplex
•
MDI/MDI-X autosensing
100 m (328.08 ft)
Category-5 (or above) twisted pair cable
IEEE 802.3i, 802.3u, 802.3ab
Table 28.
83
Table