Connecting The Ac Power Cord For The Fixed Ac Power Module (Method 1) - H3C S5130S-EI Series Manual

Switch model
S5130S-28F-EI
S5130S-52F-EI
S5130S-16S-PWR-EI
S5130S-28TP-EI
S5130S-52TP-EI
S5130S-28PS-EI
Other S5130S-EI switches
The S5130S-28F-EI and S5130S-52F-EI switches use removable power modules. The PSR75-12A,
PSR150-A1, and PSR150-D1 power modules are available for the switch. The PSR150-A1 power
module uses AC power. The PSR75-12A power module uses AC or 240V high-voltage DC power.
The PSR150-D1 power module uses –48 VDC power or RPS power.
Connecting the AC power cord for the fixed AC power
module (method 1)
1. Connect the plug of the AC power cord to the AC-input power receptacle on the switch. See
Figure
2. Use a cable tie to secure the power cord to the handle near the AC power receptacle. See
Figure
3. Connect the other end of the power cord to an AC power source.
Figure 21 Connecting the AC power cord for the fixed AC power module
Available power source
AC power source
240V high-voltage DC power
source
–48 VDC power source in the
equipment room
H3C RPS800-A or
RPS1600-A
AC power source
AC power source
–48 VDC power source in the
equipment room
AC power source
21.
22.
Connection procedure reference
Connecting the power cord for a
PSR75-12A/PSR150-A1 power module
Connecting the power cord for a
PSR75-12A/PSR150-A1 power module
Connecting the power cord for a
PSR150-D1 power module
Connecting the power cord for a
PSR150-D1 power module
Connecting the AC power cord for the fixed
AC power module (method 2)
Connecting the AC power cord for the fixed
AC power module (method 1)
Connecting the DC power cord for the fixed
DC power module (method 2)
Connecting the AC power cord for the fixed
AC power module (method 1)
18