Mounting The Switch On A Workbench - H3C S5560S-SI Installation Manual
Hide thumbs
Also See for S5560S-SI:
- Installation manual (137 pages) ,
- Configuration manual (47 pages) ,
- Troubleshooting manual (37 pages)
Table of Contents
Advertisement
Figure 11 Mounting the switch in a rack (S5120V2-10P-PWR-LI switch)
Figure 12 Mounting the switch in a rack (S5120V2-10P-LI)
Mounting the switch on a workbench
IMPORTANT:
•
Ensure 10 cm (3.9 in) of clearance around the chassis for heat dissipation.
•
Do not place heavy objects on the switch.
If a standard 19-inch rack is not available, you can place your switch on a workbench.
To mount the switch on a workbench:
1.
Verify that the workbench is sturdy and reliably grounded.
2.
Place the switch with bottom up, and clean the round holes in the chassis bottom with dry cloth.
3.
Attach the rubber feet to the four round holes in the chassis bottom.
4.
Place the switch with upside up on the workbench.
12
Hide quick links:
Advertisement
Table of Contents
