Setting Up An Irf Fabric; Irf Fabric Setup Flowchart - H3C S5560S-SI Installation Manual

Setting up an IRF fabric

You can use H3C IRF technology to connect and virtualize multiple switches into a large virtual
switch called an "IRF fabric" for flattened network topology, and high availability, scalability, and
manageability.
The switch can set up an IRF fabric only with switches from the same switch series.

IRF fabric setup flowchart

Figure 34 IRF fabric setup flowchart
Start
Plan IRF fabric setup
Install IRF member switches
Connect the grounding cables
and power cords
Power on the switches
Configure basic IRF settings
Connect the physical IRF ports
Subordinate switches reboot
and the IRF fabric is
automatically established
End
To set up an IRF fabric:
Step
1. Plan IRF fabric setup.
Description
Plan the installation site and IRF fabric setup parameters:
•
Planning IRF fabric size and the installation site
•
Identifying the master switch and planning IRF member IDs
•
Planning IRF topology and connections
•
Identifying IRF physical ports on the member switches
•
Planning the cabling scheme
29