Attaching The Mounting Brackets To The Switch - H3C S5560S-SI Installation Manual

Figure 2 Mounting brackets
1
(A)
1
(1) Screw hole for attaching the bracket to the switch
(2 ) Screw hole for attaching the bracket to the rack post

Attaching the mounting brackets to the switch

1. Determine the installation position for the mounting brackets.
The S5560S-28F-SI, S5560S-28DP-SI, and S5130S-28F-SI switches each provide two

mounting positions on the two sides for mounting brackets: one front mounting position
(near the network ports) and one rear mounting position (near the power modules).
The other switch models provide only one mounting position (near the network ports) for the

mounting brackets.
2. Align one mounting bracket with the screw holes at the mounting position. Use M4 screws to
attach the mounting bracket to the chassis. See
Figure 4
C, and
M4 screws are provided only for switches shipped with mounting brackets.
An optional mounting bracket kit contains M4 screws.
3. Repeat step
2
(C)
and Figure 5 for installing mounting bracket B,
Figure 7 for installing mounting bracket D.
2 to attach the other mounting bracket to the chassis.
1
(B)
1
2
(D)
Figure 3
8
2
for installing mounting bracket A,
Figure 6 for installing mounting bracket
2