Connecting the power cord for a built-in AC power module
Wear an ESD wrist strap. Make sure the strap makes good skin contact and is reliably
1.
grounded.
Attach the two ends of the power cord retainer clip into the two holders at the two sides of the
2.
power receptacle, and pull the power cord retainer clip upwards. See
Connect the female connector of the AC power cord supplied with the power module to the
3.
power receptacle. See callout 1 in
Pull the power cord retainer clip downwards to secure the connector to the power receptacle.
4.
See callout 2 in
Connect the other end of the power cord to an AC power source.
5.
Figure 29 Connecting the power cord for a built-in AC power module (1)
Figure 30 Connecting the power cord for a built-in AC power module (2)
Figure
Figure
30.
30.
22
Figure
29.