Appendix B Frus - H3C S5560S-SI Installation Manual

Appendix B FRUs

The S5560S-28F-SI, S5560S-28DP-SI, and S5130S-28F-SI switches each provide two power
module slots. One power module can meet the power requirement of the switch. You can install two
power modules on the switch for redundancy.
the S5560S-28F-SI and S5130S-28F-SI switches.
Table 23 Power modules available for the S5560S-28F-SI, S5560S-28DP-SI, and
S5130S-28F-SI switches
Power module
model
PSR75-12A
When two power modules are installed, you can hot-swap a power module. To avoid device damage
and bodily injury, follow the procedures in
module.
Item
Rated input voltage
AC input
Max input voltage
Rated input voltage
High-voltage DC
input
Max input voltage
Max output power
Table 23 describes the power modules available for
Specification
100 VAC to 240 VAC
@ 50 Hz or 60 Hz
90 VAC to 290 VAC
@ 47 Hz to 63 Hz
240 VDC
180 VDC to 320 VDC
75 W
Figure 20 and Figure 21
81
Remarks
For more
information
about the power
modules, see
H3C
PSR75-12A
Power Module
User Manual.
to install and remove the power