Filter Base (Ms 201 T); Carburetor (Ms 201) - Stihl MS 201 Manual

1
: Inspect the O-ring (1) and
replace if necessary.
Installing
1
2
– Coat O-ring with STIHL press
fluid, b 14
: Place the filter base (1) in the
opening (arrow) so that the
throttle rod (3) is between the
fins (2).
– Install the baffle, b 12.2
– Reassemble all other parts in the
reverse sequence.
94

12.3.1 Filter Base (MS 201 T)

– Remove the air filter, b 12.1
– Remove the baffle, b 12.2
: Remove the filter base (1).
3
: Inspect the O-ring (1) and
replace if necessary.
Installing
– Coat O-ring with STIHL press
fluid, b 14
: Push the filter base (1) into
position.
– Install the baffle, b 12.2
– Reassemble all other parts in the
12.4
1
– Open the fuel tank cap and drain
– Collect the fuel in a clean
Disconnect the fuel suction hose
only when the tank cap is open.
– Remove the filter base, b 12.3
– Remove the handle molding,
1
: Pull the fuel suction hose (1) off
1
: Disconnect the throttle rod (1)
MS 201, MS 201 C, MS 201 T, MS 201 TC
reverse sequence.

Carburetor (MS 201)

the fuel tank.
container, b 1
b 10.2
1
the nipple (arrow).
from the trigger (arrow).
1