Stihl MS 201 Manual page 122

No. Part Name
17 Flange
18 Torque wrench
19 Torque wrench
20 Installing tool 9
21 Screwdriver bit, T 20 x 100
22 Screwdriver bit, T 27 x 150
23 Screwdriver
24 Screwdriver bit, T 27 x 150
25 Hook
26 Assembly stand
27 Punch-down tool
28 Puller
- Jaws (No. 3.1)
29 Puller
30 Puller
31 Stud puller M8
32 Socket, 13 mm
33 Setting disk
34 Hook
35 Installing tool
Remarks:
1) Use for releasing only.
MS 201, MS 201 C, MS 201 T, MS 201 TC
Part No. Application
5910 855 4201 Sealing exhaust port for leakage test
5910 890 0302 0.5 to 18 Nm
5910 890 0312 6 to 80 Nm
5910 890 2209 Installing hookless snap ring in piston
5910 890 2301 IS screws
5910 890 2302 IS screws
5910 890 2306 Adjusting the carburetor
5910 890 2400 IS-P screws
5910 890 2800 Detaching springs on clutch shoes
5910 890 3101 Holding saw for repairs
5910 890 4000 Fitting electrical wires in guides
5910 890 4400 Removing oil seals
0000 893 3706 Removing oil seals
5910 890 4502 Pull off the limiter cap.
5910 890 4504 Removing flywheel
5910 893 0501 Removing bar mounting stud
5910 893 5608 Removing flywheel nut
5910 893 6600 Add-on for screwdriver (adjusting
carburetor)
5910 893 8800 Removing pickup body
5910 893 9600 Removing and installing collar nut in
sprocket cover
Rem.
1)
1)
1)
121