Clutch - Stihl MS 201 Manual

4.

Clutch

4.1 Clutch
– Troubleshooting, b 3.1
– Disengage the chain brake and
remove the chain sprocket cover,
bar and chain.
1
: Pull boot (1) off the spark plug.
– Unscrew the spark plug.
1
: Push the locking strip (1)
1145 893 5900 into the cylinder
as far as stop.
18
1
: Secure the locking strip (1)
1145 893 5900 to cylinder fin
(arrow).
– Turn the clutch clockwise until the
piston butts against the locking
strip.
1
The locking strip (1) 1145 893 5900
must butt against the cylinder wall
(arrow) and the flat side of its metal
top must rest on the piston crown
– as shown in the illustration.
1
: Apply wrench to hexagon (arrow)
and unscrew the clutch (1) – left-
hand thread.
Installing
1
: Position the clutch (1) on the
crankshaft stub so that the raised
hexagon (arrow) faces outwards.
: Fit the clutch (1) and tighten it
down firmly – left-hand thread.
– Remove the locking strip from the
cylinder.
– Reassemble all other parts in the
reverse sequence.
MS 201, MS 201 C, MS 201 T, MS 201 TC