Av Elements; Annular Buffer On Fuel; Tank (Ms 201); Tank (Ms 201 T) - Stihl MS 201 Manual

9.

AV Elements

Vibration-damping springs, annular
buffers and stop buffers are used for
the connection between the
handlebar, tank housing and
crankcase.
Damaged springs, annular buffers
and stop buffers must always be
replaced.
9.1

Annular Buffer on Fuel

Tank (MS 201)

– Disengage the chain brake and
remove the chain sprocket cover,
bar and chain.
: Take out the screw (arrow).
1
2
1
: Take out the screws (1).
: Pull the annular buffer (2) out of
the recess, inspect it and replace
if necessary.
MS 201, MS 201 C, MS 201 T, MS 201 TC
Installing
2
2
: Line up the rubber buffer (1) so
that it faces the handle housing –
the notch (arrow) must engage
the lug on the tank housing.
: Push the buffer (1) into position
between the handle housing and
crankcase.
: Insert and tighten down the
screws (2) firmly.
1
: Insert screw (1) through lug on
handle housing and into the
annular buffer.
: Insert and tighten down the
screw (1) firmly.
– Reassemble all other parts in the
reverse sequence.
9.1.1 Annular Buffer on Fuel

Tank (MS 201 T)

– Disengage the chain brake and
remove the chain sprocket cover,
bar and chain.
1
: Take out the screw (arrow).
1 1
: Take out the screws (1).
: Pull the annular buffer (2)
downwards and out, check it and
replace if necessary.
2
67