Siemens LMV5 Series Technical Instructions page 8

Technical Instructions
Document No. LV5-1000
Touchscreen kits are available to provide a human machine interface for the LMV5. Kits come
with a touchscreen and a plate kit with all necessary inputs and outputs. Standard
communication is via Modbus TCP/IP. Other communication types are available. For more
technical information about touchscreens, refer to Document No. TS-1000.
TS...
LMV5 Mounting Brackets – Qty (2) Recommended But Not Required
Recommended brackets for mounting the LMV5 in an electrical enclosure to offset the base
unit from the subpanel, allowing easy access to plugs. Two brackets are needed per LMV5.
BR-LMV5
The LMV5 has three replaceable fuses: one main power fuse and two secondary CANbus fuses.
Each LMV5 comes with spares for each fuse. Additional spare fuses are available if necessary.
FUSE6.3A-SLOW
FUSE4.0A-SLOW
Section 1
Control Panel Components (continued)
Touchscreens – Optional
Touchscreen kits with 6" or 10" touchscreen, power
supply, interconnect terminals, and optional PLC
Brackets for mounting an LMV5 in an electrical
enclosure
Control Panel Spare Parts – Not Required
5 pack of LMV5 primary fuses - 6.3A, 250V,
5x20mm, slow blow, for 120 VAC power
5 pack of LMV5 secondary CANbus fuses – 4.0A,
250V, 5x20mm, slow blow, for 12 VAC power
Page 4
HOME
LMV Series
SCC Inc.