Western Digital Ultrastar Data102 User Manual page 8

User Guide
Date
November 2019 Revision 1.13
December 2019 1.14
Revision
Moved the
System Management Overview (page 35)
Corrected LED identification tables for IOMs, PSUs, and drives in
the LEDs (page 8)
Updated servicing image to correct length values and rail servicing
extension in
section.
Updated the following for CMA Lite:
• Added
including description, specs, and layout.
• Updated
CMA Standard and CMA Lite content where applicable.
• Updated
section.
Added a note about OOBM ports configured for DHCP by default
to the OOBM Management Overview (page 37)
• Replaced references to He12 drives with Ultrastrar DC HC520
in List of Compatible Drives (page 20)
• Changed device references from OS-specific (
Linux and
throughout.
• Updated table for Approved SAS Cables in
(page 18)
• Added
• Updated
• Updated images of captive chassis-cover screws throughout
• Updated the Daisy Chaining configurations in
(page 228)
• Rebranded document to WD design
• Updated the
Comment
Supported Operating Systems (page 37)
section.
Ultrastar Data102 Rack Requirements (page 14)
CMA Lite Component Overview (page 55)
CMA Replacement (page 80)
Maximum HD Mini-SAS Configuration (page 178)
for Windows) to generic (
SCSIX:X,X,X
Subenclosure Nickname (page 220)
Supported Operating Systems (page 37)
List of Compatible Drives (page 20)
Revision History
topic to the
section.
section,
section to combine
section.
for
/dev/sgX
)
<dev>
Host Connectivity
section
Daisy Chaining
vii