Western Digital Ultrastar Data102 User Manual page 106

User Guide
h. Close all of the baskets.
i. If the Ultrastar Data102 is being installed in a rack and will subsequently be transported
inside that rack, it is important to use the included cable tie to wrap the CMA bundle to
ensure it does not get damaged during transport. If the Ultrastar Data102 is instead being
installed where it will be operated, skip this step. Remember to remove the cable ties
after the enclosure has reached its final operational location.
j. Reconnect the arm at the elbow to the connectors on the rail.
CMA Lite:
a. Press the blue latch button labeled "push" to unlatch the elbow side of the CMA arm, and
then swing the arm open.
b. Open all of the baskets.
Figure 89: Nominal Cable Length at Connectors
4. Part Replacement
4.7 CMA Replacement
96