Western Digital Ultrastar Data102 User Manual page 253

User Guide
f. Close all of the baskets.
g. Reconnect the CMA at the elbow to the connectors on the rail.
Step 3 : Cable the upper CMA.
a. Unlatch the elbow side of the CMA arm and swing it forward by pressing the blue button
that says "push" to unlatch it.
b. Gather the SAS cables, one power cable, and one Ethernet cable to install in the left
hand side.
c. Open all of the baskets
Figure 245: Nominal Cable Length at Connectors
5. System Management
5.6 Daisy Chaining
243