Western Digital Ultrastar Data102 User Manual page 122

User Guide
a. Uninstall the alignment bracket by removing the screws that secure it to the rack posts
using the screw locations in the following image. Be careful, the alignment bracket will be
free once the screws are removed. Make sure you have a solid grip on it before removing
the final screw.
b. Uninstall the rest of the screws in the rear rack rail.
c. Move to the front of the rack and remove the three screws that hold the rack latch bracket
to the front of the rack using a T15 Torx screwdriver. Be careful, the rack latch bracket
will be free once the screws are removed. Make sure you have a solid grip on it before
removing the final screw.
Figure 112: Rear Screw Locations
4. Part Replacement
4.8 Rails Replacement
112