Disabling Zoning Using Windows - Western Digital Ultrastar Data102 User Manual

User Guide
b. Issue the following command to access a single host's SMP Discover output:
c. Zone group 9 can be identified by the
d. Issue the following command to access all hosts smp_discover_list:
e. Zone group 9, 10, 11, 12, 13, and 14 can be identified by the
5.3.7 Disabling Zoning using Windows
PENDING - Remove references to sg and replace with SCSI device handles.
Step 1 : From the host server, identify the SCSI devices that are associated with the Ultrastar Data102
IOMs.
Example of the Expander Handles
0:2:0:0 9:0:1297:0
end_device-9:41:26
10:0:0:0 9:0:1298:0
end_device-9:41:27
7:0:0:0 9:0:1299:0
end_device-9:41:28
9:0:1220:0 9:0:1300:0
end_device-9:41:29
9:0:1289:0 9:0:1301:0
end_device-9:41:30
9:0:1290:0 9:0:1302:0
end_device-9:41:31
9:0:1291:0 9:0:1303:0
end_device-9:41:32
9:0:1292:0 9:0:1304:0
end_device-9:42:2
9:0:1293:0 9:0:1323:0
end_device-9:44:0
9:0:1294:0 9:0:1375:0
end_device-9:44:1
9:0:1295:0 9:0:1376:0
end_device-9:44:10
9:0:1296:0 9:0:1377:0
end_device-9:44:11
smp_discover_list /dev/bsg/expander-9:39
The above example displays PHYs 0-13 as being in zone group 9. All other devices are
labeled as
inaccessible
to. The step can be repeated on other hosts to see what zone group each host has
access to.
smp_discover_list --ignore /dev/bsg/expander-9:39
group in each of their respective zones. The above example displays PHYs 0-13 as being
in zone group 9, PHYs 14-27 as being in zone group 10, and so on.
Note: The operating system associates each SEP device as a SCSI device. The
SCSI device of the SEP can be used to get status from or control elements
within the enclosure.
9:0:1378:0 9:0:1390:0
end_device-9:44:12
9:0:1379:0 9:0:1391:0
end_device-9:44:13
9:0:1380:0 end_device-9:39:2
end_device-9:44:14
9:0:1381:0 end_device-9:41:17
end_device-9:44:15
9:0:1382:0 end_device-9:41:18
end_device-9:44:16
9:0:1383:0 end_device-9:41:19
end_device-9:44:2
9:0:1384:0 end_device-9:41:20
end_device-9:44:3
9:0:1385:0 end_device-9:41:21
end_device-9:44:4
9:0:1386:0 end_device-9:41:22
end_device-9:44:5
9:0:1387:0 end_device-9:41:23
end_device-9:44:6
9:0:1388:0 end_device-9:41:24
end_device-9:44:7
9:0:1389:0 end_device-9:41:25
end_device-9:44:8
located at the end of each line in zone 9.
ZG:9
because the host is displaying the only devices it has access
5. System Management
end_device-9:44:9
expander-9:39
expander-9:40
expander-9:41
expander-9:42
expander-9:43
expander-9:44
sas_host9
located at the end of each
ZG
5.3 Zoning
216