Examples For Starting Position; Define Starting Position Via Language Command - Siemens SINUMERIK 840D sl Function Manual

Program code
;
;
;
; and
;
;
WHENEVER $AC_MARKER[0]==1 DO $AA_OVR[X]=0 $AA_OVR[Z]=100
;
OSCILL[Z]=(X)
POSP[X]=(5,1,1)
;
;
;
;
;
M30
Figure 12-4
12.5.4

Examples for starting position

12.5.4.1

Define starting position via language command

Program code
WAITP(Z)
Extended Functions
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
Comment
(oscillation axis has not yet exited the reversal point
range 2,
but the infeed axis is ready for a
new infeed)
set the axial override of the oscillation axis to 100%
(this cancels the 2nd synchronized action)
; Start the axes
The oscillating axis Z is assigned axis X as
an infeed axis
Axis X should travel to end position 5 in
increments of 1
Sequences of oscillation movements and infeed, example 2
Comment
; enable oscillation for the Z axis
P5: Oscillation
12.5 Examples
721