Data Lists; Machine Data; General Machine Data; Setting Data - Siemens SINUMERIK 840D sl Function Manual

P5: Oscillation

12.6 Data lists

12.6 Data lists
12.6.1

Machine data

12.6.1.1

General machine data

Number Identifier: $MN_
10710 PROG_SD_RESET_SAVE_TAB
11460 OSCILL_MODE_MASK
12.6.2

Setting data

12.6.2.1

Axis/spindle-specific setting data

Number Identifier: $SA_
43700 OSCILL_REVERSE_POS1
43710 OSCILL_REVERSE_POS2
43720 OSCILL_DWELL_TIME1
43730 OSCILL_DWELL_TIME2
43740 OSCILL_VELO
43750 OSCILL_NUM_SPARK_CYCLES
43760 OSCILL_END_POS
43770 OSCILL_CTRL_MASK
43780 OSCILL_IS_ACTIVE
43790 OSCILL_START_POS
12.6.3

Signals

12.6.3.1

Signals to axis/spindle

Signal name
External oscillation reversal
Set reversal point
Alter reversal point
726
Description
Oscillations to be saved from SD
Control screen form for asynchronous oscillation
Description
Position at reversal point 1
Position at reversal point 2
Stop time at reversal point 1
Stop time at reversal point 2
Feed velocity of oscillation axis
Number of sparking-out strokes
Position after sparking-out strokes/at end of oscillation move‐
ment
Control screen form for oscillation
Oscillation movement ON/OFF
Position that is approached after oscillation before reversal
point 1, if activated in SD43770:
SINUMERIK 840D sl
DB31, ... .DBX28.0
DB31, ... .DBX28.3
DB31, ... .DBX28.4
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
SINUMERIK 828D
DB380x.DBX5004.0
DB380x.DBX5004.3
DB380x.DBX5004.4
Extended Functions