W4: Grinding-specific tool offset and tool monitoring
18.2 Online tool offset
<ToolPar>:
<Chan>:
<Sp>:
18.2.2.3
Write online tool offset, discrete (PUTFTOC)
Function
Using the predefined procedurePUTFTOC(...), an online tool offset is executed based on a
fixed offset value.
Syntax
PUTFTOC(<CorrVal>,<ToolPar>,<Chan>,<Sp>)
Meaning
PUTFTOC(...):
<CorrVal>:
<ToolPar>:
<Chan>:
<Sp>:
18.2.2.4
Activate/deactivate online tool offset (FTOCON/FTOCOF)
The online tool offset is activated or deactivated using the G commands FTOCON and
FTOCOF.
860
Number of the wear parameter (length 1, 2 or 3) in which the offset value is to be
included.
Data type:
INT
Number of the channel in which the online tool offset is to take effect.
Note:
Only required if the offset is not to take effect in the active channel.
Data type:
INT
Number of the spindle for which the online tool offset is to take effect.
Note:
Only required if the offset is to be applied to a non-active grinding wheel rather
than the active tool that is currently in use.
Data type:
INT
Write online tool offset
Offset value, which is added to the wear parameter.
Data type:
REAL
Number of the wear parameter (length 1, 2 or 3) in which the offset value is to be
included.
Data type:
INT
Number of the channel in which the online tool offset is to take effect.
Note:
Only required if the offset is not to take effect in the active channel.
Data type:
INT
Number of the spindle for which the online tool offset is to take effect.
Note:
Only required if the offset is to be applied to a non-active grinding wheel rather
than the active tool that is currently in use.
Data type:
INT
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
Extended Functions