The following output variables are written for measurement type 23:
Output variable
$AC_MEAS_RESULT[0]
$AC_MEAS_RESULT[1]
$AC_MEAS_RESULT[2]
$AC_MEAS_RESULT[3]
$AC_MEAS_RESULT[4]
$AC_MEAS_RESULT[5]
8.5.5.5
Measurement of a tool length of two tools with the following orientation:
Tool orientation
For tools whose orientation points to the toolholder shows must be set in the system variables
$AC_MEAS_TOOL_MASK, bit 9 = 1 (0x200). The calculated tool lengths are then included
negatively.
Two turning tools each with their own reference point with a tool orientation in the approach direction
Settings in the system data:
Left-hand tool: Approach direction and tool orientation +x
System variable
$AC_MEAS_TOOL_MASK = 0x2
$AC_MEAS_DIR_APPROACH = 0
Extended Functions
Function Manual, 10/2015, 6FC5397-1BP40-5BA3
8.5 Setting zeros, workpiece measuring and tool measuring
Description
Tool length in x
Tool length in y
Tool length in z
Tool length L1
Tool length L2
Tool length L3
Meaning
Tool position in x direction (G19)
Approach direction +x
M5: Measurement
565