Activating The Tensioner Lift - DURKOPP ADLER 867 Service Instructions Manual

Programming

21.1 Activating the tensioner lift

The factory setting for the machine is such that the tensioner will remain
closed during a seam regardless of whether the sewing feet are lifted or
not.
Opening the tensioner while the sewing feet are lifted and the seam is
not yet completed makes sense, for instance, when you DO NOT sew
corners.
To activate the tensioner lift:
1. Press the
 You are on the technician level.
2. Use the buttons under the display to select the parameter t 09 00.
3. Use +/- to enter the desired value ( Parameter list 867).
4. Confirm with
Service Instructions 867 - 04.0 - 10/2019
NOTICE
Production of loose stitches!
When sewing corners with active tensioner lift and simultaneous
sewing foot lift, the machine will produce a loose stitch.
Do not activate the pneumatic tensioner lift when lifting the sewing
feet unless the sewing feet are NOT lifted during the seam.
and
.
buttons at the same time.
111