DURKOPP ADLER 867 Service Instructions Manual page 69

Winder
Adjusting the winder run
Fig. 53: Adjusting the winder (4)
(8) - Block
(10) - Winder wheel
(12) - Threaded pin
To adjust the winder run:
13. Loosen the threaded pin (13).
14. Adjust the switch cam (14) such that it is just contacting the leaf
15. Adjust the switch cam (14) such that the winder lever (3) has no axial
16. Tighten the threaded pin (13).
Assembling the winder
Fig. 54: Adjusting the winder (5)
(1) - Screws
To assemble the winder:
17. Place the winder on the machine arm.
18. Tighten the screws (1).
Service Instructions 867 - 04.0 - 10/2019
⑧
⑩
⑫
⑬
spring (15) when the block (8) has engaged in the locking disk.
play.
①
⑭
(13) - Threaded pin
(14) - Switch cam
(15) - Leaf spring
⑭
⑮
67