Improving The Image Quality Of A Copy - Oce VarioPrint 2045-65 NC Job Manual

Improving the image quality of a copy

Introduction
The Océ VarioPrint 2045-65 NC uses proven technology to detect photos,
rasters and fine lines on the originals. Do not adjust the default quality settings
unless you need to create an image of deviating quality.
Check and, if necessary, adjust the settings for the following originals:
Originals containing extensive photos.
■
Originals that are mainly text.
■
Before you begin
To check your image quality setting, make a test copy before you start a
■
copy job with multiple sets.
Copying a photo with the platen
Place and align the photo face down on the platen.
1
Follow the feed direction according to the dimensions of the photo.
Select the 'Copy' mode
2
The 'Basic' section automatically opens.
Select '1-sided' in the 'Original' and 'Copy' function boxes.
3
Select 'No' in the 'Staple' function box.
4
Activate the 'Paper' section.
5
Make sure that the 'Paper input' is open.
Select the size and orientation of the required paper in the 'Source' function
6
box.
Make sure that the orientation of the paper matches the feed direction of the
photo.
If the size of the required paper does not match the dimensions of your
Note:
photo, adjust the enlargement or reduction (see 'Make an enlarged or reduced
copy' on page 119).
The copy function
.
127