Table of Contents
Advertisement
Make an enlarged or reduced digital document
Introduction
In order to enlarge or reduce a digital document when scanning with the
automatic document feeder, select the required size.
The Océ VarioPrint 2045-65 NC will automatically adjust an enlargement or
reduction.
In order to enlarge or reduce a digital document when scanning on the platen,
adjust the size and enlargement or reduction.
The scanned image is aligned in the center of the page or aligned against the
right-upper corner of the page. The alignment depends on the input location of
the originals.
Input of origi-
nals
Automatic docu-
ment feeder
Platen
The Océ VarioPrint 2045-65 NC permits the use of originals with
Note:
dimensions that are not configured on the machine. However, the automatic
document feeder cannot detect these paper sizes. You must adjust the
enlargement or reduction to scan these originals.
The scan function
Zoom direction
Location of image on the
page
157
Advertisement
Table of Contents
