Interrupt a print job
Introduction
The interrupt mode allows you to start any job while a job with many sets to
print is executed. The procedure for interruptting a job is as follows:
The interrupt key
■
The current print job stops after the printing of the current set is complete.
■
The job information and the job settings are stored in the machine memory.
One or more copy, print or scan jobs can be started.
■
The interrupt key
■
The suspended print job continues.
■
The Key Operator can disable the interrupt mode.
Note:
If a copy control device or external finisher is connected to the Océ
Note:
VarioPrint 2045-65 NC, the interrupt mode is not available.
Before you begin
You can only enter the interrupt mode when the Océ VarioPrint 2045-65 NC
■
processes a job. The message box informs you when the Océ VarioPrint
2045-65 NC accepts the interrupt mode request.
Interrupting a print job
Press the interrupt key
1
[38] Press the interrupt key
[38] Press the interrupt key
66
Océ VarioPrint 2045-65 NC Job Manual
is pressed to enter the interrupt mode.
is pressed to exit the interrupt mode.
while a print job is processed.