Table of Contents
Advertisement
Copying a 11 x 17 original with the platen
Place and align the original face down on the platen.
1
Use the short-edge feed direction.
Select the 'Copy' mode
2
The 'Basic' section automatically opens.
Select '1-sided' in the 'Original' and 'Copy' function boxes.
3
Select 'No' in the 'Staple' function box.
4
Activate the 'Paper' section.
5
Make sure that the 'Paper input' card is open.
Select 11 x 17 in the 'Source' function box.
6
[72] Select 11 x 17
[72] Select 11 x 17
If the trays do not contain A11 x 17 paper, add 11 x 17 paper to tray 1
Note:
(see 'Add paper to the paper trays' on page 166).
If the required size is not 11 x 17, adjust the 'Enlargement or
Note:
reduction'(see 'Make an enlarged or reduced copy' on page 119).
Select the number of copies.
7
Press the start key .
8
The copy function
.
115
Advertisement
Table of Contents
