Oce VarioPrint 2045-65 NC Job Manual page 120

Enter the settings for the job part.
5
Select '1-sided' or '2-sided' in the 'Original' function box of the 'Basic'
■
section.
Activate the 'Extra' section.
■
Open the 'Original type' card.
Keep the setting or change the original type.
Press the combine key .
6
The originals of the job part are copied.
[74] Copy subsequent job part
[74] Copy subsequent job part
Repeat steps 2, 5 and 6 for each subsequent job part.
7
Press the start key
8
[75] Finish the job
[75] Finish the job
Press the start key
9
The request, to confirm the end of the job, can be disabled by the Key
Note:
Operator.
118 Océ VarioPrint 2045-65 NC Job Manual
to finish the job.
to confirm the end of the job.