Oce VarioPrint 2045-65 NC Job Manual page 163

Scanning a photo on the platen
Place and align the photo face down on the platen.
1
Follow the feed direction according to the dimensions of the photo.
Select the 'Scan' mode
2
The 'Workflow' section automatically opens.
Select a 'Scan profile' using the arrow keys
3
Activate the 'Original' section.
4
Select '1-sided' in the 'Original' function box.
Select the icon in the 'Original type' function box to define the orientation of
5
the information of the original.
Activate the 'Digital document' section.
6
Make sure that the 'Page size' card is open.
Select the size and the orientation in the 'Size' function box.
7
Make sure that the orientation matches the feed direction of the photo (see
'Make an enlarged or reduced digital document' on page 157).
Open the 'Image quality' card.
8
Select 'Photo' in the 'Optimize' function box.
9
Use the arrow keys
10
[109] Select photo to improve the image quality
[109] Select photo to improve the image quality
Press the start key .
11
The scan function
.
to adjust the 'Lighter or darker' value from 2 down to -2.
.
161