Oce VarioPrint 2045-65 NC Job Manual page 118

Copying a 5 x 8 original with the platen
Place and align the original face down on the platen.
1
Use the long-edge feed direction.
Select the 'Copy' mode
2
The 'Basic' section automatically opens.
Select '1-sided' in the 'Original' and 'Copy' function boxes.
3
Select 'No' in the 'Staple' function box.
4
Activate the 'Paper' section.
5
Make sure that the 'Paper input' card is open.
Select 5 x 8 in the 'Source' function box.
6
[73] Select 5 x 8
[73] Select 5 x 8
If the trays do not contain 5 x 8 paper, add 5 x 8 paper to tray 1 (see 'Add
Note:
paper to the paper trays' on page 166).
If the required size is not 5 x 8, adjust the 'Enlargement or reduction'(see
Note:
'Make an enlarged or reduced copy' on page 119).
Select the number of copies.
7
Press the start key .
8
116 Océ VarioPrint 2045-65 NC Job Manual
.