Configuring Password - Nortel BSR252 Configuration - Basics

Table 9 DDNS
Label
Password
Enable Wildcard
Off Line
IP Address Update
Policy:
DDNS Server Auto
Detect IP Address
Use Specified IP
Address
Use IP Address
Apply
Reset

Configuring Password

To change the password of your Business Secure Router (recommended), click
SYSTEM, then the Password tab. The screen illustrated in
this screen, you can change password of the Business Secure Router.
Description
Enter the password associated with your username (up to 31
characters).
Select the check box to enable DYNDNS Wildcard.
This option is available when CustomDNS is selected in the
DDNS Type field. Check with your Dynamic DNS service
provider to have traffic redirected to a URL (that you can
specify) while you are off line.
Select this option only when there are one or more NAT routers
between the Business Secure Router and the DDNS server.
This feature has the DDNS server automatically detect and use
the IP address of the NAT router that has a public IP address.
Note: The DDNS server not be able to detect the proper IP
address if there is an HTTP proxy server between the Business
Secure Router and the DDNS server.
Select this option to update the IP address of the host names to
the IP address specified below. Use this option if you have a
static IP address.
Enter the IP address if you select the User Specify option.
Click Apply to save your changes to the Business Secure
Router.
Click Reset to return to the previously saved settings.
Nortel Business Secure Router 252 Configuration — Basics
Chapter 5 System screens 87
Figure 19 appears. In