Dhcp Table Screen - Nortel BSR252 Configuration - Basics

Table 109 System Status: Show Statistics (continued)
Label
Status
TxPkts
RxPkts
Errors
Tx B/s
Rx B/s
Up Time
Collisions
Poll Interval(s)
Set Interval
Stop

DHCP Table screen

With DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132)
individual clients can obtain TCP/IP configuration at start-up from a server. You
can configure the Business Secure Router as a DHCP server or disable it. When
configured as a server, the Business Secure Router provides the TCP/IP
configuration for the clients. If set to None, DHCP service is disabled and you
must have another DHCP server on your LAN, or else the computer must be
configured manually.
Click MAINTENANCE, and then the DHCP Table tab. Read-only information
here relates to your DHCP status. The DHCP table shows current DHCP Client
information (including IP Address, Host Name, and MAC Address) of all
network clients using the DHCP server.
Description
For the WAN port, this displays the port speed and duplex setting if
you're using Ethernet encapsulation and down (line is down), idle
(line (ppp) idle), dial (starting to trigger a call) and drop (dropping a
call) if you're using PPPoE encapsulation.
For a LAN port, this shows the port speed and duplex setting.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
This field displays the number of bytes transmitted in the last
second.
This field displays the number of bytes received in the last second.
This field displays the elapsed time this port has been up.
This is the number of collisions on this port.
Type the time interval for the browser to refresh system statistics.
Click this button to apply the new poll interval you entered in the
Poll Interval field above.
Click this button to halt the refreshing of the system statistics.
Nortel Business Secure Router 252 Configuration — Basics
Chapter 22 Maintenance 399