Configuring TELNET
Click REMOTE MANAGEMENT to open the TELNET screen.
Figure 128 Telnet
Table 91
Table 91 Telnet
Label
Server Port
Server Access
Secured Client IP
Address
Apply
Reset
describes the fields in
Description
You can change the server port number for a service if needed,
however, you must use the same port number in order to use that
service for remote management.
Select the interfaces (If any) through which a computer can access
the Business Secure Router using this service.
A secured client is a "trusted" computer that is allowed to
communicate with the Business Secure Router using this service.
Select All to allow any computer to access the Business Secure
Router using this service.
Choose Selected to just allow the computer with the IP address that
you specify to access the Business Secure Router using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Nortel Business Secure Router 252 Configuration — Basics
Chapter 18 Remote management screens 351
Figure
128.