Figure 70 Vpn Contivity Client Advanced Rule Setup; Table 49 Vpn Contivity Client Advanced Rule Setup - Nortel BSR252 Configuration - Basics

Figure 70 VPN Contivity Client advanced rule setup

Table 49 describes the fields in

Table 49 VPN Contivity Client advanced rule setup

Label
Group Authentication Enable Group Authentication to have the Business Secure
Group ID
Group Password
On Demand Client
Tunnel
Figure 70.
Description
Router send a Group ID and Group Password to the remote
IPSec router for initial authentication. After a successful initial
authentication, a RADIUS server associated with the remote
IPSec router uses the User Name and Password to authenticate
the Business Secure Router. You must also configure the Group
ID and Group Password fields when you enable Group
Authentication.
After Group Authentication is not enabled, the remote IPSec
router uses the User Name and Password to authenticate the
Business Secure Router.
Enter the group ID exactly as the IPSec router administrator gives
it to you. This field only applies when you enable Group
Authentication.
Enter the group password exactly as the IPSec router
administrator gives you. This field only applies when you enable
Group Authentication.
Select this check box to have any outgoing packets automatically
trigger a VPN connection to the remote IPSec router.
When On Demand Client Tunnel is not enabled, you need to go
to the VPN Summary screen and click the Connect button to
create a VPN connection to the remote IPSec router.
Nortel Business Secure Router 252 Configuration — Basics
Chapter 13 VPN 217