Configuring Reports - Nortel BSR252 Configuration - Basics

378 Chapter 20 Logs Screens
Table 100 Log settings
Label
Time for Sending Log
Log
Send Immediate Alert
Log Consolidation
Active
Log Consolidation
Period
Apply
Reset

Configuring Reports

To change your Business Secure Router log reports, click Logs, and then the
Reports tab. The screen appears as shown in
The Reports page displays which computers on the LAN send and receive the
most traffic, what kinds of traffic are used the most, and which Web sites are
visited the most often. Use the Reports screen to have the Business Secure Router
record and display the following network usage details:
•
•
•
•
•
NN47923-500
Description
Enter the time of the day in 24-hour format (for example 23:00
equals 11:00 p.m.) to send the logs.
Select the categories of the logs that you want to record. Logs
include alerts.
Select the categories of alerts for which you want the Business
Secure Router to instantly e-mail alerts to the e-mail address
specified in the Send Alerts To field.
Some logs (such as the Attacks logs) can be so numerous that
it becomes easy to ignore other important log messages.
Select this check box to merge logs with identical messages
into one log.
You can use the sys log consolidate msglist
command to see which log messages are consolidated.
Specify the time interval during which to merge logs with
identical messages into one log.
Click Apply to save your customized settings and exit this
screen.
Click Reset to begin configuring this screen afresh.
Web sites visited the most often
Number of times the most visited Web sites were visited
The most-used protocols or service ports
The amount of traffic for the most used protocols or service ports
The LAN IP addresses to and from which the most traffic has been sent
Figure 151.