Viewing Web Site Hits; Table 101 Reports - Nortel BSR252 Configuration - Basics

380 Chapter 20 Logs Screens
Table 101

Table 101 Reports

Label
Collect Statistics
Send Raw Traffic
Statistics to
Syslog Server for
Analysis
Apply
Reset
Report Type
Refresh
Flush

Viewing Web site hits

In the Reports screen, select Web Site Hits from the Report Type drop-down list
to have the Business Secure Router record and display which Web sites have been
visited the most often and how many times they have been visited.
NN47923-500
describes the fields in
Description
Select the check box and click Apply to have the Business Secure
Router record report data.
Select the check box and click Apply to have the Business Secure
Router send unprocessed traffic statistics to a syslog server for
analysis.
You must have the syslog server already configured in the Log
Settings screen.
Click Apply to save your changes to the Business Secure Router.
Click Reset to begin configuring this screen afresh.
Use the drop-down list to select the type of reports to display.
Web Site Hits displays the Web sites that have been visited the most
often from the LAN and how many times they have been visited.
Protocol/Port displays the protocols or service ports that have been
used the most and the amount of traffic for the most used protocols or
service ports.
LAN IP Address displays the LAN IP addresses to and from which
the most traffic has been sent and how much traffic has been sent to
and from those IP addresses.
Click Refresh to update the report display. The report also refreshes
automatically when you close and reopen the screen.
Click Flush to discard the old report data and update the report
display.
Note: All of the recorded reports data is erased when you turn off the
Business Secure Router.
Figure 151.