Table 100 Log Settings - Nortel BSR252 Configuration - Basics

Table 100 describes the fields in

Table 100 Log settings

Label
Address Info
Mail Server
Server Port
Mail Subject
Send Log To
Send Alerts To
Syslog Logging
Active
Syslog Server IP
Address
Log Facility
Send Log
Log Schedule
Day for Sending Log
Figure 150.
Description
Enter the server name or the IP address of the mail server for
the e-mail addresses specified below. If this field is left blank,
logs and alert messages are not sent through e-mail.
Enter the port number that the mail server uses.
Type a title that you want to be in the subject line of the log
e-mail message that the Business Secure Router sends.
Logs are sent to the e-mail address specified in this field. If this
field is left blank, logs are not sent through e-mail.
Alerts are sent to the e-mail address specified in this field. If
this field is left blank, alerts are not sent through e-mail.
Syslog logging sends a log to an external syslog server used to
store logs.
Click Active to enable syslog logging.
Enter the server name or IP address of the syslog server that
logs the selected categories of logs.
Select a location from the drop-down list. In the log facility, you
can log the messages to different files in the syslog server.
Refer to the documentation of your syslog program for more
details.
This drop-down menu is used to configure the frequency of log
messages being sent as e-mail:
Daily
Weekly
Hourly
When the Log is Full
None
If you select Weekly or Daily, specify a time of day when the
e-mail will be sent. If you select Weekly, you must also specify
which day of the week the e-mail is to be sent. If you select
When Log is Full, an alert is sent when the log fills up. If you
select None, no log messages are sent.
Use the drop-down list to select which day of the week to send
the logs.
Nortel Business Secure Router 252 Configuration — Basics
Chapter 20 Logs Screens 377