Bandwidth Manager Class Configuration - Nortel BSR252 Configuration - Basics

Table 78 Bandwidth Manager: Class Setup
Label
#
Filter Name
Service
Destination IP
Address
Destination
Port
Source IP
Address
Source Port
Protocol ID
Move

Bandwidth Manager Class Configuration

Configure a bandwidth management class in the Class Setup screen. You must
use the Summary screen to enable bandwidth management on an interface before
you can configure subclasses for that interface.
To add a subclass, click BW MGMT, and then the Class Setup tab. Click the
Add Sub-Class button to open the screen shown in
Description
This is the number of a filter entry. The ordering of your filters is
important, as they are applied in turn. Use the Move button to reorder
your filters.
This is the Class Name that you configured in the Edit Class screen.
If you selected a predefined application (FTP, H.323 or SIP), it displays
here.
This field displays the destination IP address in dotted decimal notation
followed by the subnet mask. The IP 0.0.0.0/0 means all.
This field displays the port number of the destination. 0 means all ports.
This field displays the source IP address in dotted decimal notation
followed by the subnet mask. The IP 0.0.0.0/0 means all.
This field displays the port number of the source. The 0 means all ports.
This field displays the protocol ID (service type) number, for example: 1
for ICMP, 6 for TCP or 17 for UDP. The 0 means all protocols.
Type the number of a filter entry and the number for where you want to
put it. Click Move to move the filter to the number that you typed. The
ordering of your filters is important, as they are applied in order of their
numbering.
The filter entry numbers are not static names for the entries. A filter
entry's number changes as you move the filter entry up or down in the
list. Also, only the existing filter entries are counted, you cannot have any
blank filter entries. For example, if you have only three filters and try to
move number one to seven, it becomes filter three.
Nortel Business Secure Router 252 Configuration — Basics
Chapter 15 Bandwidth management 305
Figure 100.