Henny Penny EVOLUTION ELITE Series Operator's Manual page 85

6 6 . . 3 3 C C l l o o c c k k S S e e t t
Press and hold the Program button
1 1 ) )
PROG" "ENTER CODE" shows in the display.
Press the program button
2 2 ) )
the left display.
Enter code 1, 2, 3.
3 3 ) )
"CS-1 ENTER DATE MM-DD-YY" flashes in the left display. Use the product
4 4 ) )
button to set the date in the right display.
Press the right arrow button and "CS-2 ENTER TIME" flashes in the left display
5 5 ) )
and the time flashes in the right display. Press the up and down arrow buttons,
or product buttons, to change the time.
Press the right arrow button and "CS-2 ENTER TIME" flashes in the left display
6 6 ) )
and "AM" or "PM" flashes in the right display. Use the up and down arrow
buttons to choose "AM" or "PM".
Press the right arrow button and "CS-3 TIME FORMAT" flashes in the left
7 7 ) )
display and "12-HR" or 24-HR" shows in the right display. Use the up and down
arrow buttons to choose a 12-hour time format or a 24-hour time format.
Press the right arrow button and "CS-4 DAYLIGHT SAVING TIME" flashes in
8 8 ) )
the left display. Use the up and down arrow buttons to choose daylight saving
time for your area: 1.OFF; 2.US (2007 & after); 3.EURO; or 4.FSA (US before
2007).
Press and hold the program button
9 9 ) )
M-F 1 XX:XX A XX
M-F 2 XX:XX A XX
M-F 3 XX:XX A XX
M-F 4 XX:XX A XX
SAT 1 XX:XX A XX
SAT 2 XX:XX A XX
SAT 3 XX:XX A XX
SAT 4 XX:XX A XX
SUN 1 XX:XX A XX
SUN 2 XX:XX A XX
SUN 3 XX:XX A XX
SUN 4 XX:XX A XX
for 5 seconds until "LEVEL 2" "SP
again and "CLK SET" "ENTER CODE" flashes in
to exit.
75