Henny Penny EVOLUTION ELITE Series Operator's Manual page 46

NOTE: "BULK OIL DISPOSE?" in the Special Program Mode or Set-Up Mode, must to
set to "YES" for the Bulk Oil Dispose System to operate. Also, a password code step
(1, 2, 3) can be added in Special Programming, SP-27.
Press and hold either filter button
2 2 ) )
and "1.EXPRESS FILTER?".
Press and release the right arrow button twice until display shows "3.DISPOSE".
3 3 ) )
Press "✓" button and display shows "DISPOSE?" "YES NO", or enter code 1, 2,
3, if SP-27 is set to "YES".
Press "✓" button; "DRAIN VAT?" "YES NO" shows in display. Press "X" button if
4 4 ) )
drain pan has oil in it, Skip to step 9.
Press "✓" button and display shows "OPEN DRAIN". Pull out on drain knob to
5 5 ) )
open drain and display shows "DRAINING". Oil drains from vat into drain pan.
Display shows "VAT EMTY" "YES NO". Verify that vat is empty, and press "✓"
6 6 ) )
button.
Display shows "CLEAR OLD OIL FROM OIL LINES" "✓=PUMP" "X=DONE".
7 7 ) )
Press and hold "✓" button for a few seconds to clear old oil from lines. Once
cleared, press "X" button.
Display shows "CLN VAT COMPLETE" "YES NO". Once vat is clean, press "✓"
8 8 ) )
button.
Display shows "DISPOSE" and then "✓=PUMP" "X=DONE. Press "✓" button.
9 9 ) )
Display shows "DISPOSING..." "X=STOP" and oil is pumped from drain pan to
1 1 0 0 ) )
bulk oil container. When all oil is pumped from pan, press "X" button.
Display shows "DISPOSE" and then "✓=PUMP" "X=DONE. Press "X" button;
1 1 1 1 ) )
display shows "CLOSE DRAIN". Close drain.
Display shows "MANUAL FILL VAT" (or "FILL VAT FROM BULK" if equipped),
1 1 2 2 ) )
followed by "IS POT FILLED?", along with "YES NO". Fill the vat to the lower
indicator line on the rear of the vat. See
Press "✓" button and fryer returns to normal operation.
1 1 3 3 ) )
36
until display shows "*FILTER MENU*",
3.3 Filling Or Adding Oil , page 19.