Operating Components - Henny Penny EVOLUTION ELITE Series Operator's Manual

12 Right Timer 1 Button
13 Right Timer 2 Button
14 Right Heat Button
15 Filter Beacon®
16 Power Switch
17 Filter Switch
Figure 3-2 Operating Components
The 0 product button can be used to start an idle mode if
enabled in special program mode.
During normal operation, press this button to start and
stop cook cycles for the right basket; press to change dis-
played product; also used for "✓" to indicate yes or to
confirm.
During normal operation, press this button to start and
stop cook cycles for the right basket; press to change dis-
played product; also used for "X" to indicate no or cancel.
Press to turn on and off the heat system for the right vat
(s); on full vats either heat button can be used.
A Filter Beacon® is found beside each black drain knob;
when lit blue, indicates the oil should be filtered at this
time; beacon flashes when the drain needs opened or
closed.
When the power switch is turned to the on position, power
is supplied to the controls and pumps.
For fryers with a bulk oil supply, press this button to fill the
BIB.
17