Avaya VSP 7200 Series Installing Manual page 53

Installing the switch in an equipment rack
c. Push the end of the retaining latch out so it opens up.
d. Insert the bracket pins into the desired holes in the frame. The pin block accommodates
three different rack types. In the default position, the pin block fits into racks with square
holes. When retracted halfway, it fits into racks with large round holes. When fully
retracted, it fits into racks with small round holes.
November 2016 Installing the Avaya VSP 7200 Series 53
Comments on this document? infodev@avaya.com